CA DFRobot

Results: 24
Select Image Part # Mfr. Description Datasheet Availability Pricing (USD) Filter the results in the table by unit price based on your quantity. Qty. RoHS
DFRobot DFR1252
DFRobot DFRobot DX-M1 AI Accelerator M.2 delivers 25 TOPS (INT8) in an M.2 2280 form factor at 25W. Features 4GB LPDDR5 and PCIe Gen3 x4 for low-latency edge AI. Compatible with Raspberry Pi 5, LattePanda, x86/ARM; supports PyTorch, ONNX, TensorFlow via DXNN SDK. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot FIT1013
DFRobot DFRobot High-performance expansion cable kit for UNIHIKER M10 and K10 enables plug-and-play sensor and actuator connectivity without expansion shields. Simplifies setup for rapid IoT and embedded projects. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot FIT1038
DFRobot DFRobot M0601 direct-drive hub motor for robots/AGVs/AMRs. Combines motor, servo, encoder in a 102mm chassis, removing need for drivers reducing wiring complexity Video Photos M0601 Direct-Drive Hub Motor for AGV (Right Orientation, Integrated FOC Servo) Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot FIT1042
DFRobot DFRobot M0601 direct-drive hub motor for robots/AGVs/AMRs. Combines motor, servo, encoder in a 102mm chassis, removing need for drivers reducing wiring complexity Video Photos M0601 Direct-Drive Hub Motor for AGV (Left Orientation, Integrated FOC Servo) Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot KIT0194
DFRobot DFRobot UNIHIKER M10 expansion ecosystem enables AIoT projects via Gravity interface. Connect 16+ sensors, vision modules, actuators without wiring. Bridges Python to hardware for rapid builds like irrigation, security systems. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot MBT0044
DFRobot DFRobot Building Block Expansion Board supports micro:bit, UNIHIKER K10/M10. Features 18650 battery slot for wireless use. LEGO-compatible base + plug-and-play Gravity ports enable fast motor, servo, camera integrationno complex wiring. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0661
DFRobot DFRobot Gravity: SFA40 HCHO Sensor uses Sensirion SFA40 for precise formaldehyde detection, avoiding false alarms from odors. Integrated SHT4x enables temp/humidity compensation. Ideal for smart homes, HVAC, air quality monitoring. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0663
DFRobot DFRobot Fermion BMV080 PM2.5 sensor uses Bosch BMV080 for compact fanless laser particulate detection. Measures PM1/PM2.5/PM10 with 10 g/m accuracy. 2420 mm, 6 A sleep power, -10-year lifespan. Ideal for IoT, wearables, air quality monitoring. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0664
DFRobot DFRobot Gravity BMP585 sensor uses Bosch BMP585 for pressure and temperature sensing. Gel-filled waterproof design resists moisture and chemicals. 0.3 hPa accuracy, <0.1 Pa noise, -700 A power. I2C/UART. Ideal for drones, weather, navigation. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0665
DFRobot DFRobot Gravity BMP581 is a high-precision barometric pressure and temperature sensor using Bosch BMP581. Offers 0.3 hPa accuracy and <0.1 Pa noise for stable altitude sensing. Supports 3.3V/5V, I2C/UART. Ideal for drones, navigation, and weather logging. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0666
DFRobot DFRobot Fermion BMP585 is an ultra-compact barometric pressure/temperature sensor using Bosch BMP585 (1916mm). 0.3 hPa accuracy, <0.1 Pa noise. Gel-filled waterproof design. 2 A sleep. I2C/SPI/I3C. Ideal for wearables, drones, GPS trackers. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0667
DFRobot DFRobot Fermion BMP581 uses Bosch BMP581 barometric sensor for pressure and temperature measurement. 0.3 hPa accuracy with high stability and low offset, enabling detection of small altitude changes like floor-level shifts and liquid level monitoring. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0678
DFRobot DFRobot Gravity STCC4 CO2 sensor uses Sensirion STCC4 thermal conductivity chip for stable gas sensing. Measures CO2 (4005,000 ppm, [100 ppm + 10%]) plus temperature and humidity via onboard SHT40. Cost-effective 3-in-1 air quality monitoring module. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0682
DFRobot DFRobot 648 solid-state DTOF LiDAR provides 12020 FOV with 512-point simultaneous ranging up to 5 m. Area-array design enhances real-time obstacle detection, ideal for robot navigation and blind-spot avoidance. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0684
DFRobot DFRobot Graphene Circular Flex Force Sensor handles up to 120C and supports direct soldering for secure use. Measures 20g6kg with 10M cycles. Ideal for robotics, industrial, automotive sensing. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0686
DFRobot DFRobot Circular Flexible Potentiometer uses graphene pressure sensing in a 0.45mm film. Outputs 0.20.8V with 1M cycles. Ideal for precise angle feedback in robotics, automation, smart devices. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0690
DFRobot DFRobot Ultra-thin 0.45mm flexible ribbon sensor converts curved surfaces into linear touch interfaces. Uses graphene tech with IP67 water/dust resistance. Ideal for wearables, dashboards, and soft robotics. Arduino/ESP32 compatible for easy integration. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0691
DFRobot DFRobot Fermion C4002 mmWave radar uses 24GHz FMCW to detect presence beyond PIR limits. Senses motion, stationary occupants, and micro-movements (e.g., breathing) up to 1010 m. Ideal for smart lighting, HVAC, security, and Home Assistant IoT systems. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0706
DFRobot DFRobot Industrial-grade EC sensor with integrated probe/housing for water conductivity measurement. K=1 electrode, 12000 S/cm range, 0.1 S/cm resolution, 1% FS accuracy. Supports salinity and TDS conversion for water quality monitoring. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0707
DFRobot DFRobot Industrial-grade EC sensor with integrated probe/housing for water conductivity measurement. K=10 electrode, 1020000 S/cm range, 1 S/cm resolution, 1% FS accuracy. Supports salinity and TDS conversion for water quality monitoring. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0708
DFRobot DFRobot RS485 Water Quality pH Sensor is an industrial-grade probe-in-housing system for continuous monitoring. Measures pH 014 with 0.01 resolution and 0.15 accuracy. Designed for robust, precise water quality applications. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0709
DFRobot DFRobot Industrial-grade ORP water quality sensor with integrated probe and housing for reliable measurement. Range -1999 to 1999 mV, 1 mV resolution, 5 mV accuracy. Ideal for precise water quality and redox monitoring. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot SEN0712
DFRobot DFRobot Industrial-grade residual chlorine sensor with integrated probe/housing for easy deployment. Measures hypochlorous acid and hypochlorite ions 010 mg/L with 0.01 mg/L resolution and 5% FS accuracy for reliable water quality monitoring. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1
DFRobot TEL0190
DFRobot DFRobot RainbowLink V2 is a pocket-sized debugging workstation combining 4 communication channels: isolated RS485, RS232, and dual TTL. Includes 12V/5V/3.3V power outputs. Ideal for field engineering, IoT, and industrial automation. Non-Stocked Lead-Time 4 Weeks
Min.: 1
Mult.: 1